Elements and profiles

Grena a.s. » Menu » Main menu » Fire resistant materials » Jointing and assembly materials

Aluminum mounting profiles GRENA

Instalation instructions of Grenamat incombustible panel with aluminum profiles in steel designs CD - UD

Instalation instructions of Grenamat incombustible panels with aluminum profiles for wooden constructions

Examples of use of aluminum fastening profiles on a metal grid CD - UD

Grenamat incombustible board with a groove in the central H - profile at the bottom end U - profile.

When mounting the panels, recognizeable gap is visible in the joint H - profile.
Gap 0-15 mm

Příklady použití hliníkových upevňovacích profilů na kovovém CD - UD roštu

Hanging placement of incombustible panels Grenamat: F - profile mounted at the back of the panel, placed in the U - profile.

Used when fitting panels without joints in between


	Finish of cladding from Grenamat incombustible panel : U - profile under the ceiling


	Corner joint from Grenamat incombustible panel: corner K - profile in the groove

Examples of the use of aluminum profiles fastening on a wooden grid

Příklady použití hliníkových upevňovacích profilů na dřevěném roštu

Grenamat incombustible board with a groove in the central H - profile at the bottom end U - profile.
When mounting the panels, recognizeable gap is visible in the joint H - profile.
Gap 0-15 mm

Hanging placement of incombustible panels Grenamat: F - profile mounted at the back of the panel, placed in the U - profile.

Used when fitting panels without joints in between

Finish of cladding from Grenamat incombustible panel : U - profile under the ceiling

Corner joint from Grenamat incombustible panel: corner K - profile in the groove

Various possibilities of fasteners for mounting Grenamat incombustible panels Metal dowel pins

Omega - profiles, capping strip

Z-profile, screws

Z-profile	Fixture with decorative wooden screws	Coupling profile for wall and ceiling structures
Aluminium ending profiles


Jointing of boards and mounting methods

Clips

Z-profile	Wood profile

Bolted joints	Usage of screws Screwing through the surface layer. Tolerance for screw shank must be maintained. For countersunk screws, use washers to avoid tear of the surface foil.

Special slips and profiles - walls, ceilings

Attachment to wooden structures Attachment of boards on a wooden supporting frame with the option to insert insulation. Easy alignment of the supporting grid with special washers and alignment of panels along all axes.	Bonding of boards to adjustable metal supporting profiles Grenamat boards can be attached to metal profiles by our special bonding process which has been fully tested. This way, an invisible attachment to the structure is ensured.

Other options include attaching metal profiles by screws	Attachment with stainless clips

Bonding	Attachment with screws

Attachment with screws

Jointing of cladding panels made of Grenamat boards
Jointing boards - metal tongue and groove	Jointing boards - Omega profile with PVC cover strips

Jointing boards - Omega profile with PVC cover strip and HPL tape	Joint Strengthening